SFC Dewatering Screw press Machine and sludge dewatering system on
Papermaking wastewater treatment
Screw Press could be used in the treatment of industrial
wastewater, surface water, reused water and Municipal Wastewater
Treatment Plant .
SFC provides total solution for Screw Press and the whole process
1. Survey. Confirm estimate dosing capacity and material of the
2. Proper capacity.model and auxiliary equipments.
3. Design.Standardizing design .
4. ISO9001 . Production and fabrication
SFC 's DL Sludge dehydrator multi-disc screw press is equipped with
unique technology, which allows dewatering sludge while
automatically self-cleaning the filter mesh. This enables stable
and constant dehydrating without depending on flush water for
Thus SFC DL Sludge dehydrator multi-disc screw press can not only
save backwash water but also dewater oil sludge.
The dimensions and other information of SFC Polymer preparation
unit are as follows:
|Inlet Consistency(SS 0.4-3.5%)||0.1-1.25||0.2-2.5||0.45-3.75||0.9-7.5||1.4-12.5||2.8-25||4.2-37.5||4-37.5||8-75|
D.S(kg/hr) Dried Sludge
Water Content’s Rate(%)
Diameter(mm) * Quantity
The Volute Dewatering Press is a new - generation sludge dewatering
equipment with its unique self - cleaning dewatering technology
“Volute”(Multi - Diskplate screw press)originally developed by
SFC.The equipment of offers various advantages such as
“Maintenance-Free” , ”Extremely Low Running Cost “ or “Compact
Design” etc.over conventional sludge management methods.The
equipment was commercialized in 2007 and more than 1000 reference
have been installed across 80 city.
Select type of Screw Press is according the sludge type and
concentration of wastewater ,dried sludge volume
1. Polymer Dosing System PL2 or PL3 system
2. Washing Pump
3. Metering pump ,feeding pump
4. Sludge Conveyor
Warmly welcome to contact us!!
Shanghai Fuchan Machinery Technology Co.,Ltd.